Clean natural stone facade with the best strategies
Today you will know all the effective methods of cleaning natural stone facade effectively. You will learn to leave the walls completely new and shiny, without causing damage to the surface. In fact, it is an obligation to perform a good cleaning job.
Importance of cleaning natural stone facade
The facades, regardless of the place of installation, often have nooks and crannies where rainwater does not penetrate. Therefore, all dust and dirt accumulate quite seriously. So it is very necessary that you learn to clean ask natural facade effectively.
Dirt only harms the image of the house, but it can also negatively affect the surface. Therefore, a hard coating could be formed, that is, the fearsome black coastline.
So we will be developing good strategies to clean the walls effectively and very quickly. We thank the domestic cleaning agency for giving us all these timely advice.
What you should keep in mind the clean stone natural facade
It is necessary to know perfectly the nature, that is the degree of porosity, of the surface to be cleaned. You also have to analyze the type of dirt that is affecting the stone. In addition, the cleaning treatment that we are going to apply and also the one that has been previously carried out on the surface.
In this post we will focus on cleaning natural stone facade in any type of building. We will analyze several factors to be able to apply more or less deep tricks.
The Cleaning Services Jersey City for a good job
The cleaning companies in Spain, for example this great organization, have given their help to carry out the work. Our research has been quite profound, therefore, we have achieved the best methods. By having our help you will enjoy an impeccable and gleaming surface.
Therefore, we encourage you to pay attention to the best tricks of this home Cleaning Services Jersey City. It is essential that you apply everything to the letter and without altering the order of the steps to follow. In this way, you will avoid mistakes and inconveniences when performing the work.
Clean natural stone facade
To eliminate the black coast of this type of surface, we have three basic cleaning methods. First you can spray water under pressure, then use the sandblasting and finally a chemical cleaning. However, there are some aspects that you should take into account before cleaning.
You have to study the surface and also the entire structure of it. It is necessary to check if there are no risks of landslides or how they can be stabilized. You also have to review the methods you will use to be able to walk the wall, for example, vertical elevation or scaffolding.
And finally, you have to know the degree of dirt and also the thickness of the black crust that you must eliminate. Therefore, it is appropriate that you do a small test before starting the cleaning.
Cleaning by spraying water at low pressure
This trick is very effective when the dirty is not adhered on the surface, in fact it is quite easy. You must use a pressure of 2.5 to 4 atmospheres to clean the affected area. Do not use too much water, to prevent the stone from eroding.
You must use water mist and clean the building in horizontal stripes from top to bottom. However, there is another trick we can apply when the degree of dirt is too high.
Sandblasting
This is a method that complements the previous one, and we should only use it when the previous process has not taken effect. You can find abrasive sand grains, both natural and synthetic. This method should be used dry and has a great advantage.
It allows the user to see directly how the surface looks when working. It is not necessary that the area be dried, it is also a method that is much cheaper.
Perform a chemical cleaning
On this occasion you must use clays with a great absorbent power, for example sepiolite or apulgite. Its use is very little dangerous, however, it is necessary to hire a house Cleaning Services Jersey City to do the work. This way you will avoid making unnecessary mistakes.
Prepare your mind a little
Now that you know the methods we are going to use, it is essential that you prepare the mind. We recommend that you take note of all the information, so that you remember all our tricks. However, we are going to introduce cleaning using visual information, because it is very effective.
Next we will watch a YouTube video with a simple and practical explanation that you should take advantage of. This time you will learn how to clean natural stone facade effectively. After this, you will be much more focused when you start working on the wall.
Processes not advisable to clean natural stone facade
Never use water with a lot of pressure to spray, as it can be dangerous for the stone. On the other hand, you can not use saturated steam cleaning either. Otherwise, you can cause very dangerous stresses in the interior structure of the surface.
In addition, the uncontrolled sandblasting in the stone is completely contraindicated. Abrasive grains with great power and large size cause craters in the wall.
Also, do not use mechanical cleaning with abrasive rotating discs and similar tools. It may seem like a very fast and effective method, but it can cause scratches on the surface.
Other incorrect methods
In addition, a cleaning with very powerful acids or detergents, for example hydrochloric acid, can be harmful. It has too strong effects and is quite complicated to control.
To finish, the cleaning with flame is the worst option to perform any hygiene work on the stone. It is very dangerous, since its thermal shock can cause irremediable damage to the surface. It is much better that you use the tricks that we are going to develop in this post.
Unsuitable processes to clean natural stone facade
As we have already mentioned, the buildings that are in outdoor areas suffer from different dirt factors. For example, environmental pollution, bird droppings and also graffiti. In addition, the surface can produce roots.
One aspect to keep in mind is that plants that adhere to the surface can never be violently removed. It is much better to use some chemical processes that go to the root of the problem.
Perform a mechanical cleaning
Cleaning companies can use electric tools at low speed and with a small size. The specialized operators recommend not to use powerful elements, rather scrapers and even pumice stone.
On the other hand, you can also use drills that have a very thin tip, similar to what dentists use. The idea is to drill and destroy the entire black coast, but with great delicacy, without damaging the healthy stone.
It is a manual process and requires much knowledge, therefore, you should leave the work in the hands of professionals. You can also use fine sandpaper if the surface is not smooth.
Cleaning with water mist
To perform this work you must use an atomizer with low speed on the stone surface. It will form a mist with small water droplets that perform a deep cleaning on the surface, but without causing damage.
Cleaning with ultrasound
It is a system that complements the previous method, however, it is much more sophisticated. It manages to completely eliminate the war coast on the surface without damaging the material. You have to use a low speed, to avoid any type of risk of detachment.
It is suitable for cleaning stones of small size and has surprising cleaning results. Ultrasounds can produce waves that completely destroy the dirt deposits in the wall.
Cleaning with aeroabrasives
A method of the highest precision through its micro sand jets, which allow a good cleaning job. The abrasive content is in a tank, and then spheres of aluminum are projected to perform the maintenance.
Clean with attapulgite and sepiolite poultices
These are very fine clays that allow to absorb a large amount of water and eliminate the problem of dirt. However, it can never be used in porous natural stone. In fact, the more polished the stone is, the better.
The paste must be removed using wet cotton compresses in water, preferably distilled. Now you must blow the layer using a can of compressed air and thus eliminate any kind of rest. This method is ideal when the stone surface is very delicate and does not allow water mist.
Make a paste with the aforementioned products, which you must apply with a layer of two centimeters thick. Now you must cover and seal with polyethylene and let it stand for a month. When the time passes, you must use micro jets of sand to clean the remains.
Observations with compressed air
When you are going to use compressed air, it is very important that you do not hit the nozzles on the surface. Otherwise you will originate scratches that are very complicated and even impossible to eliminate. It is best to read the manufacturer's instructions before using the product.
On the other hand, if you do not have a can of compressed air, you do not have to worry about the matter. We will place for you an Amazon link where you can buy a product of the highest quality at a reasonable price. This way you will work on cleaning stained natural stone effectively.
Clean with laser
When the black coast is thick enough, it is appropriate to use the wax for cleaning. This manages to heat and turn into steam any type of acid deposited on the facade. However, when touching the wall completely clean, it is a harmless product.
This is a cleaning process that does not generate pollution and does not leave any dust. In addition, it is ideal for white walls or when the stain is very dark. In addition, it serves to clean reliefs and sculptures. However, you should never use it on polychrome stones, because they can affect its color.
For less deep cleaning
However, in many occasions it is not necessary to perform cleaning too deep on the surface. For example, if you have a small house or a sophisticated office, less complicated processes are enough. In fact, it could be said that they are reduced techniques of the previous methods.
For example, you must first use a vacuum cleaner to remove any dust in the area. The micro particles are the main problem affecting the facades. On the other hand, if the problem is small, you can even do the job with a medium size duster.
Remove the stains
On the other hand, if you have a stain on the surface, it is essential that you do not use very strong chemicals. Also, do not use white vinegar, even if it is a homemade trick that is well known to everyone. To solve the stain, it is very likely to be eliminated only with the use of clean water.
However, if it is attached to the surface, you can apply a cleaning solution with baking soda. Make a thick paste, which you should leave at rest throughout the night. The next day rinse the surface and you will get very effective results without much effort.
Clean natural stone facade with specific products
Now, it is also important that you use a specific product to perform the cleaning work. In many occasions the above tricks are not enough, therefore, you have to apply a chemical. However, it is vitally important that it be of the highest quality and that it can be used safely.
For this reason, we are going to recommend a very practical product for the surface at Amazon. It has a very accessible price, therefore, if you take advantage of it you will work on cleaning natural stone façade. On the other hand, we recommend that you protect your hands and also your face with gloves and a mask.
Latest cleaning tips
It is essential to perform a constant cleaning and regular maintenance of the surface. Never let the dust accumulate, let alone the moisture in the stone. Carry out superficial cleaning every week and a deep cleaning every month, to ensure a correct cleanliness.
Anyway, we will leave for you another YouTube video that serves as an excellent conclusion to the post. Here we will learn all that we have been missing from cleaning natural stone façade effectively. If you wish, you can comment on the video or ask any questions you may have.
We have come to the end of this great post to clean natural stone facade effectively and totally. We develop quite effective tricks and the most advanced cleaning processes. Therefore, it is time to start working. We are sure that the surface will be impeccable.
We have explained technological and chemical remedies, besides analyzing several practical tricks. However, remember that the success of the work is based on how constant you are doing the cleaning. However, this post still does not end, we have another advice.
On many occasions we have mentioned that it is preferable to leave complicated work to professionals. If you decide to hire LaEmpresaDeLimpieza, you will get the best benefits. Therefore, we hope you know a little more about us.
The Cleaning Services Jersey City offers you good solutions
This excellent Cleaning Services Jersey City New Jersey for many years has been dedicated to hygiene work on any surface. We are specialists in cleaning any type of facades, regardless of the material of manufacture. We leave the stone impeccable and gleaming, just as if it were new.
In addition, we can also clean other materials, for example wooden walls and ceramics. We also do work on floors and roofs, so that the maintenance of your home is total. It does not matter if you have a small home or a large company, we make a total hygiene.
You must decide now for us
In this company we work in a very responsible way, providing the highest quality to our customers. We have the most accessible prices in the market, therefore, you will not make a large investment. However, you will enjoy the results obtained in a very short time.
We have very advanced technology and cutting-edge machinery to perform the best jobs. In addition, every week we receive training, to be updated on the most effective methods. If you hire us, we are sure that you will not regret it.
If you want more information about us, we encourage you to visit our website. You can register completely free and also get more cleaning post. To finish, we wait for you in our offices in Madrid with the best service.